Does anyone have any ideas how to set up the Netstream4Sat with iPhone or iPad with iOS/ipadOS 17.4.1?

In my eyeTV Netstream App the Netstream is visible, but any attempts to change something crashes the app or does nothing.

The Netstream works fine with my actual configuration, but i have to change my satellite setup.

Mac Pro 2013 with Monterey 12.7.1 newest version. EyeTV Sat and alternately Eyetv Netstream 4sat connected to sat1.

In both cases Diseq1.0 with 3 transponders connected. All scanned channels are recognised and appear ok.

Like previous versions howver, build 8531 still often crashes when changing a channel list.

Trying out Eyetv Netstream 4sat led to the same problem as well as a more serious second problem:

Recording is very erratic and often  second blank window appears. 

Sometimes works, sometimes not -- even for 2 conscutive programs on the same channel.

 Eyetv Netstream 4sat is thus unusable for recording.

SOftware needs a vigorous overhaul/

Regards,

Brian Coleman

I

I have a problem with the Netstream 4Sat.
I set up the device according to the specifications. The EyeTv app (Android) also finds the device and I can configure it. After I have made all the settings, I want to search for the channels.
When searching for channels, however, it doesn't find a single channel.
I've tried different configurations.
Quaddro LNB and also Unicable.
Satellite Astra 19.2°
Even downloading the station list from the Internet via the app does not deliver any stations.

Does somebody has any idea?

When using Airplay 2 Speakers (such as HomePod Mini)  and the Netstream App on an Apple TV (4k in my example) Apple TV is unable to sync the Audio to the video. Since this does work very well with all other Apps running on Apple TV such as Netflix, Youtube, or even the App of the local TV station I assume the Netstream App needs a small update to ensure audio/video sync is possible on an Apple TV Box.

Besides this issue the Netstream App works very well with the Netstream 4sat Box.

Are there any chances Geniatech will look into this?

Thanks

Now switching to a fresh Catalina (no upgrade) and EyeTV4 (4.0.0. - v8520).

EyeTV seems to work well. Recordings were made. Usually I exported my recording to iTunes (via h.264 conversion by Handbrake).

Export doesn't work (seems stuck, no final file) but opening the package in finder does reveal the transport stream file (.ts).

Unfortunately the .ts seems to be downsampled from the high res recording to standard definition - which seems odd (hi -res logo but lo-res recording, VLC and handbrake tell it's a lo-res video).

It seems eyetv4sat is downsampling on any reason. Same recording with EyeTV 3 gets a hi-res stream.

Any suggestions on how to force the netstream4sat and EyeTV4 to hi-res streams?

Thanks Chris

I have a uniciable configuration with 4 frequencies, connected to Port 1 on 4Sat. Sometimes when I switch to a new channel (Click on the program guide) on my Mac (actually EyeTV 4, 8524, MacOS 11.3, happened on all versions before) I get sometimes a new window a "no signal" message.

If I take my iPhone with the Netstream app, I see, the config is reset to Quad Multi. I have to change to unicable, activate all 4 channels manually and it works again. This happens approx once a month.

Any Ideas?

Dirk

Will this ever work? 

I own an EyeTV 300/310-Set which is equipped with an IR-receiver and IR-RemoteControl. Additionally I bought the Netstream 4Sat, all together worked fine with the EyeTV-3 Software and macOS High Sierra. In between the 300/310-Set shows some problems. There are problems to switch the channels (have to wait for a long time until the station has been found) and often the application hangs. This only happens by using the 300/310-Set, not with the Netstream 4S. But when opening the first TV-window it is always the one from the 300/310-set. I deleted the settings and configured all new, but this did not help. So I want to shut off the 300/310-Set but then I cannot use the remote control any more. I do not want to use an iPhone-app, I am used to the EyeTV-Remote-Control. 

My question: Is there any IR-Receiver which can replace the 300/310-Set, so that I can use the remote-control together with the EyeTV-3-Software further on?

Thank you!

i have version: 1.1.0-402r1

thanx

tom

I have an issue with my Netstream 4sat. It runs on all devices perfectly; without my Philips TV ... On this, only the HD tv channels are running.
Non HD channels are completely pixelated!

I have already tried every setting, but nothing helps. I have also tried all 4 HDMI-ports and also different cables ...

Now I have no more idea?!

Does anybody has an idea and can help me?

But because we are in the Republic of Ireland, where the state free channels are on Eutelsat Ka Sat 9A, we have to add these channels from a second satellite dish manually to the existing Eurobird 9°E channel list.

Could anyone who uses EyeTV Netstream 4sat confirm: does manual adding channels actually work?

It recently stopped working on our old EyeTV. The process still exists (Add channel manually then complete form with frequency, polarisation, FEC, DVB etc.), but nothing is actually added to the channel list. We know it is not the hardware, as the Eutelsat Ka channels show up just fine via a Xoro box. It is definitely a software issue. We are running OSX 10.14 Mojave on the iMac that the old Eye TV is connected to.

If we don't hear back from someone able to do this, then sadly, we'll be finally giving up EyeTV for a boring old Samsung SmartTV instead...! Have tried emailing Geniatech, but no response received (which probably tells me the Samsung is a better bet these days anyway...)

Thanks!

I can only watch HD channels on my Philips TV (model 55PUS6101 / 12) with EyeTV.
All other transmitters are completely pixelated and only the sound is audible.

This works perfectly on all other devices (iPhone, iPad, iMac etc.).

Which settings are wrong???

THANK YOU!

i have two netstream 4 sat (1st and 2nd revision). In EyeTV for Mac v3 (latest Update) with receiver show up with two channel. But each receiver has only one active cable attached to the sat receiver. How can I disable the second channel in eyetv for Mac. Restart, Reinstalling and eyetv reporter did not help.

regards

Peter 

When can we expect an update for the iOS EyeTV Netstream App?

Thanks in advance,
Sven

I have a Netstream 4Sat - latest version and was wondering what the Netstream Wifi Setup option in the iOS app does.

Does the 4Sat have builtin wifi or not?

So far, I was not able to setup a Wifi connection with the app.

Thanks,

Peter

So I ask here as well: Anyone who could help me? 
 

Thanks in advance,
Chris Igl

Everything seems to be ok and all channels are listet. But when I select any channel watching it I always get the message no signal.

Any ideas? Thanks in advance.