Ton 29 Report post Posted June 30, 2016 When will all 4 decoders be used by EyeTV. Presently is does not. Quote Share this post Link to post Share on other sites
djlyon 1 Report post Posted August 10, 2016 I totally want EyeTV to be able to use more than 2 tuners on the same device ! Quote Share this post Link to post Share on other sites
Ton 29 Report post Posted August 13, 2016 It is even not able to use the 4 decoders in their own Netstream 4C. Apparently their software people are unable to delete a few lines of coding in EyeTV. Shame on both companies. Quote Share this post Link to post Share on other sites
djlyon 1 Report post Posted August 19, 2016 I am not buying NetStreamer 4C because of this ! Heck, I would even buy TWO I want to be able to open ALL the channels on 4 muxes at the same time. I have the necessary CPU, RAM and gigabit LAN. And also the displays, no problem here Quote Share this post Link to post Share on other sites
Mikyesun 26 Report post Posted December 4, 2017 On 13.8.2016 at 8:33 AM, Ton said: It is even not able to use the 4 decoders in their own Netstream 4C. Apparently their software people are unable to delete a few lines of coding in EyeTV. Shame on both companies. Ton, we had this discussion before, please see attached 2 pic´s, I`ve started on our eyetv netstream 4c with eyetv 3 version 3.6.9 (7522) - 4 recordings with no issue . did you enable it as you did successful with the netstream 4sat, if not please see below 1) Quit EyeTV 2) Open the Terminal application, from the Applications/Utilities folder 3) Enter this command into the Terminal defaults write com.elgato.eyetv "max SAT2IP tuners" -int 4 4) Press Return 5) Quit the Terminal 6) Launch EyeTV again. Quote Share this post Link to post Share on other sites
Ton 29 Report post Posted December 5, 2017 @Mikyesun You are wasting your time on a thread that is over 1 full year old and already solved for a long time. Quote Share this post Link to post Share on other sites