djlyon 1 Report post Posted November 14, 2019 Hi, I've purchased and received my second Netstream 4c just now, and although the first one is purchased June 2017, the one purchased November 2019 says: ------------------------------------------------------------------------------------------------------------------- Elgato SAT>IP Server 1.1.0-369b3, Oct 14 2014, 14:00:33 Copyright (C) 2013-2014 Elgato Systems GmbH, Germany Pre-release version. For testing purposes only. Do not ship! MAC: 00:0C:6C:08:01:47 Board ID: 1 Name: EyeTV Netstream 4C (327) Compiler Settings: DEBUG RELEASE OPTIMIZE BUILT BY rolf@S-M-UBUNTU12-EG45M-UD2H VIXSDEVICE_DEBUG = WARNING + RUNTIME VIXSHAL_DEBUG = WARNING + RUNTIME FRONTEND_DEBUG = WARNING + RUNTIME XCODE_DEBUG = WARNING + RUNTIME GPIO_DEBUG = WARNING + RUNTIME I2C_DEBUG = WARNING + RUNTIME ------------------------------------------------------------------------------------------------------------------- No such message "Pre-release version. For testing purposes only. Do not ship!" on the first device, the info is as it should be. After setting it up in EyeTV (7528) the channels open just fine - they were already tuned and stored from the first tuner. I can open 8 different channels from 8 different muxes (frequencies) as expected, and the window titles clearly reflect both tuners beeing used. But since it cleary says "Pre-release version. For testing purposes only. Do not ship!" - how can I update the firmware now ? There is not button in EyeTV and no firmware file to download and upload in the web interface. Please advise how to proceed. Thank you ! Quote Share this post Link to post Share on other sites
eyekey 18 Report post Posted November 17, 2019 On 11/14/2019 at 1:31 PM, djlyon said: Hi, I've purchased and received my second Netstream 4c just now, and although the first one is purchased June 2017, the one purchased November 2019 says: ------------------------------------------------------------------------------------------------------------------- Elgato SAT>IP Server 1.1.0-369b3, Oct 14 2014, 14:00:33 Copyright (C) 2013-2014 Elgato Systems GmbH, Germany Pre-release version. For testing purposes only. Do not ship! MAC: 00:0C:6C:08:01:47 Board ID: 1 Name: EyeTV Netstream 4C (327) Compiler Settings: DEBUG RELEASE OPTIMIZE BUILT BY rolf@S-M-UBUNTU12-EG45M-UD2H VIXSDEVICE_DEBUG = WARNING + RUNTIME VIXSHAL_DEBUG = WARNING + RUNTIME FRONTEND_DEBUG = WARNING + RUNTIME XCODE_DEBUG = WARNING + RUNTIME GPIO_DEBUG = WARNING + RUNTIME I2C_DEBUG = WARNING + RUNTIME ------------------------------------------------------------------------------------------------------------------- No such message "Pre-release version. For testing purposes only. Do not ship!" on the first device, the info is as it should be. After setting it up in EyeTV (7528) the channels open just fine - they were already tuned and stored from the first tuner. I can open 8 different channels from 8 different muxes (frequencies) as expected, and the window titles clearly reflect both tuners beeing used. But since it cleary says "Pre-release version. For testing purposes only. Do not ship!" - how can I update the firmware now ? There is not button in EyeTV and no firmware file to download and upload in the web interface. Please advise how to proceed. Thank you ! Do you have a Mac in your household which is not updated to Catalina? If so, download an older EyeTV (v3.6.9 build 7521 should work) and updated within EyeTV -> Settings -> Devices. There should be a button. Quote Share this post Link to post Share on other sites
djlyon 1 Report post Posted November 24, 2019 I'm stuck to High Sierra anyway, due to lack of Nvidia drivers for the 9xx, 10xx, 20xx series. I've installed the older 7521 version but there is no button under any of the Encoding, Signal, Info tabs. Firmware for the device with "Pre-release version. For testing purposes only. Do not ship!" is 1.1.0.369b3-V1 Firmware for the "normal" device is 1.1.0.402r1-V1 as displayed in the Devices-Info tab. I had to power off each of the devices in turn. If both are connected, Info tab only shows "2 Geniatech EyeTV 4C devices connected", no other firmware, IP, etc info. Please advise Thank you ! Quote Share this post Link to post Share on other sites
Adam 0 Report post Posted June 30, 2020 Would it be possible for someone to mail me the 7412 or 7416 version of the Mac application? I have many versions in my backup but no 7412/7416 that it seems I need to update my Netstream 4c, which now has 1.1.0.390r1-v1 installed. Please help... I'm desparate!!! my email (published here, just to speed up things): macadam@vangaalen.homeip.net Quote Share this post Link to post Share on other sites
Adam 0 Report post Posted July 2, 2020 I've got version 402 running now, thanks. Will see if my problems are solved now. I will remove the temporary email-address (as published above). Quote Share this post Link to post Share on other sites