Leaderboard

Finally i bought a new Netstream 4SAT. (model Feb.17) Everything works fine again, so all my assumptions has been wrong. (Reminder: MacOS-Sierra has been suspected - as the installation of 10.12 and the disfunction of EyeTV happens at the same time (or close to). Also the Firmware or combination of FW and ExeTV version has been suspected, too. But various tests and a reset to fabric settings doesn't work either. It turns out the my Netsream 1SAT (or the initial Netstream product) has a defect which curious results. Some additional findings, which might be useful for others too: - the APP Netstream (for IOS) shows more options/information if it connects to a 4SAT compared to a 1SAT model especially the ability to change the LNB Settings (Quad/Multi/DiSEqC | Quattro | Unicable) comes up with the 4SAT only (make sense, right) - the build in WEB-Interface is nicer in the old 1SAT model compared to the new 4SAT one (now it´s a text base version only) - there was no documentation sent with (not an issue) but the Quick Installation Guide mentioned on the package was not delivered. Nor any hint where to find the online documentation (as minimum required)...maybe due to one of the very first shipments of the new model (S/N:15 !!) - still confusing, the number of channel the search finds compared to a typical TV (with embedded SAT receiver), in my case 595 vs. 1411 ?!? having said this, i do not miss anyone from my ca. 40 channels i use from time to time. I´m now using - Netstream 4Sat (with Software Elgato DVB>IP Server 1.1.0-402r1, Jan 14 2017, 10:18:13) - EyeTV 3.6.9 (7514) - running on a iMAC (mid 2011) with MacOS Sierra 11.12.4 - EyeTV APP for IOS - Netstream APP for IOS