Sign in to follow this  
Vanessa

Reset procedure

Recommended Posts

Here is the procedure to reset EyeTV Netstream 4C.

  1. Connect the power cable to the device, along with an Ethernet cable and the coaxial cable for the DVB-C signal.
  2. Switch off EyeTV Netstream 4C.
    • After you do this, all LEDs will be off.
  3. Press the Reset button and keep it pressed.
  4. Switch on the EyeTV Netstream 4C again.
    • The left LED will light up solid red.
    • After a few seconds the right LED will light up solid blue, while the left LED will remain solid red.
  5.  When the right LED turns solid blue, release the Reset button.
    • Both LEDs will be remain lit for a few seconds.
    • Then, EyeTV Netstream 4C will boot up again.
  6. Wait until EyeTV Netstream 4C has booted up again
    • The LED on the left will turn solid green.
  7.  Launch EyeTV on the Mac, THC on Windows, or the Netstream app on your portable device to configure EyeTV Netstream 4C.

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this